High Pressure Nitrogen Hose - 6' Regulator Connection Hose

High Pressure Nitrogen Regulator Hose

For use to connect any high pressure secondary regulator to the Nitrogen cylinder.

Notes and Warnings:

There are many situations where people prefer to connect the high pressure hose directly. Whether it be to get the Nitro tank out of the fridge, or just not wanting a regulator attached to the tank.

Please keep in mind that this connection is for Nitrogen or Beer Gas Mixture ONLY, THIS WILL NOT CONNECT TO A CO2 TANK 

Both of the secondary regulators that we offer (Chudnow and Taprite) have pressure relief valves built into them. SOME SECONDARY REGULATOR BRANDS DO NOT HAVE PRESSURE RELIEF VALVES! Connecting a high pressure hose to a secondary regulator that does not have a pressure relief valve could be very dangerous.  

When working with a high pressure hose, never use a barb fitting with a clamp. Always connect the hose to the regulator with an MFL threaded fitting.

The suggested method of connecting a secondary regulaotor to a nitrogen system is through a primary regulator attached to a bank of secondaries rather than using a high pressure hose. Using a primary regulator attached to a bank of secondary regulators is the safest and easiest way to accomplish this and it costs about the same.

For a setup to use with left hand threaded regulators (Taprite) use RG511N
For a setup to use with right hand threaded regulators (Chudnow) use RG511N-R

FAQs about the High Pressure Nitro Hose:

• What is the Length of the hose?  6'
• What is the Max pressure it supports?  2750 MAX PSI
• What connection does the hose have to attach to the regulator?  This has a 1/4" MPT.  This fitting will screw into the side of most regulators on the market.
• What type of connector does the hose have for the CO2 cylinder?  CGA-580 (Fits most standard nitrogen tank used for pure nitrogen gas and beer gas mixtures)

Additional Notes and Warnings:

It is recommend that you use a primary connected to secondaries as a first choice.
You are increasing your risk by using a high pressure gas line and you should take care to protect the hose and as with any pressurized gas system always secure the NItro tank with a strap or chain.
Do not try to use this high pressure hose setup with nitrogen.

Scroll to view product options.

Scroll to view product options.

Help other customers

Have a question about this product?

Others probably do too! Ask a question and we'll follow up with you individually. If your question is added to our FAQ section, it will remain anonymous.

Other Resources

Replacement Parts:

Fits These Applications: